$205.00 – $240.00
Mini-IEC input connector (detachable line cord sold separately)
Leadtime: stock to 12 weeks
Contact sales@zaxis.net for volume pricing over 25 pieces.
This compact power converter features a 3-pin mini-IEC input connector and detachable line cord, and an output terminal block for Enable, -Vout and +Vout connections.
As with all Bear Power Supplies, you get inrush current limiting, EMI filtering, and fusing encapsulated in the module.
These single-output supplies are available in 5W, 10W, 15W and 30W models. RoHS compliant.
| Dimensions | N/A |
|---|
| BP6 | Part Number | Input Connector | Output Connector | Power (W) | Voltage (V) | Current (A) |
| BP62005050 | IEC320 C6 | Terminal Block | 5W | 5V | 1.000A | |
| BP62005120 | 12V | 0.417A | ||||
| BP62005150 | 15V | 0.333A | ||||
| BP62005240 | 24V | 0.208A | ||||
| BP62010050 | IEC320 C6 | Terminal Block | 10W | 5V | 2.000A | |
| BP62010120 | 12V | 0.833A | ||||
| BP62010150 | 15V | 0.667A | ||||
| BP62010240 | 24V | 0.417A | ||||
| BP62015050 | IEC320 C6 | Terminal Block | 15W | 5V | 3.000A | |
| BP62015120 | 12V | 1.250A | ||||
| BP62015150 | 15V | 1.000A | ||||
| BP62015240 | 24V | 0.625A | ||||
| BP62030050 | IEC320 C6 | Terminal Block | 30W | 5V | 6.000A | |
| BP62030120 | 12V | 2.500A | ||||
| BP62030150 | 15V | 2.000A | ||||
| BP62030240 | 24V | 1.250A |
| Parameter | Condition | Minimum | Typical | Maximum |
| Input | ||||
| Input frequency (Hz) | 47 | 63 | ||
| Input current (A) | ||||
| 5W output | 110/220VAC | 0.1 / 0.06 | ||
| 10W output | 110/220VAC | 0.2 / 0.11 | ||
| 15W output | 110/220VAC | 0.28 / 0.19 | ||
| 30W output | 110/220VAC | 0.55 / 0.37 | ||
| Inrush current (A peak) | 264VAC | 8 | ||
| EMI | FCC Class B | |||
| Leakage current (µA) | 500 | |||
| Input voltage (VAC) | 90 | 264 | ||
| Output | ||||
| Hold-up time (ms) | 115VAC full load | 10 | ||
| Output voltage | see voltage-current chart above | |||
| Output current | see voltage-current chart above | |||
| Output voltage accuracy (%) | +/- 3 | |||
| Line regulation (%) | +/- 0.5 | |||
| Noise & ripple (% pk-pk) | 0.7 | 1 | ||
| Temperature coefficient (%) | +/- 0.1 | +/- 0.3 | ||
| Over-voltage protection (%) | 3.3V output | 105 | 115 | 140 |
| Over-voltage protection (%) | 5 to 48V output | 105 | 115 | 130 |
| Overload protection (%) | 130 | |||
| Load regulation (%) | 90-264VAC | +/- 0.5 | ||
| General | ||||
| Efficiency (%) | 75 | |||
| Isolation voltage (VDC) | 4243 | |||
| Switching frequency (kHz) | ||||
| 5W and 10W output | 100 | |||
| 15W and 30W output | 60 | |||
| Environmental | ||||
| Humidity (%) | 0 | 95 | ||
| Operating Temp Range (°C) | Full load | - 40 | + 60 | |
| Half load + | - 40 | 70 | Half load + | |
| Storage Temp Range (°C) | - 40 | + 85 | ||
| Cooling | convection |
Certifications for safety and performance, including use in medical instruments, include UL2601-1, UL60950-1, CAN/CSA-C22.2 (No.601.1-M90), CAN/CSA-C22.2 (No.60950-1-03), EN 61000-3, EN 61000-4, EN 60601-1-2, IEC 601-A/A2, and EN 55011. Click to see more.
Most BP Series power converters feature an Enable pin that can be used to turn the convertor on (open) or off (shorted to the “_” terminal).
This unique feature allows you to mount the power supply at the rear of the system chassis, near the AC line input, and control it from an ON/OFF switch on your system’s front panel without talking the primary AC power to the front panel. The Enable pin is referenced to the output negative terminal(labeled “_”) and is thus isolated from the primary.
When left open, the Enable pin typically floats at about +4.6V. The input impedance for this node is greater than 10KΩ.
